USES

Inhibited Citric Acid 3109 is used to maintain the efficiency of a zeolite water softener. Whenever the softener resin bed is fouled with iron, formula 3109 should be used to restore peak efficiency. Inhibited Citric Acid 3109 can also be added to softeners weekly as a normal preventative maintenance routine. Inhibited Citric Acid 3109 can also be added to closed piping systems to remove iron oxide deposits and to passivate iron surfaces.

PRODUCT DESCRIPTION

Physical State: Liquid
Color: Clear
Odor: Amine
pH: 3.5
Density: 10.2 lbs./gal.

Initial Cleaning: Soak resin bed in 8% by weight solution of Inhibited Citric Acid 3109 for 4-8 hours. Back wash resin bed thoroughly and regenerate softener. For severely fouled resin beds, increase soak time to 12-24 hours. A second application may be beneficial for improved iron removal.

Preventative Maintenance Cleaning: Add 32 ounces of Inhibited Citric Acid 3109 to the brine tank for each cubic foot of softener capacity every 8 to 10 generations or as iron fouling demands. For additional information on product application, contact your industrial cleaners.com representative.

Loop Cleaning: Dosage will vary depending on severity of fouling. Contact your industrial cleaners.com representative for further application information.

HANDLING

Inhibited Citric Acid 3109 is an acidic material. Do not take internally. Avoid contact with skin and eyes. Should contact occur, flush immediately with large amounts of water. If any discomfort persists, seek medical attention. Read relevant Material Safety Data Sheet before handling this product.

Inhibited Citric Acid 3109 is packaged in 55, 30, 15 and 5 gallon non-returnable containers.

Click here to order!